You might have experienced some online streaming channels, and you would be thinking about the gamers who use their mics to play music with their streams. In case you are using Windows 10 on your system, and you want to know how you can play the music through your mic, then it’s a simple and easy process. If you need any clarification, let me know, but I hope this helps.7) Conclusion How to Play Music Through Mic in Windows 10 Lastly, you could also turn down the background audio when chatting on Discord anyway, but I realize that isn't a solution.Īlso, as some of the comments have pointed out, it's worth checking if you have everything in the correct jack and that everything is setup properly software-wise, including in Windows and for your audio driver. If neither of those options are convenient you can try setting Discord's input sensitivity above the typical peak amount when you're listening to loud music in the background, so at least it won't trigger automatically on your music alone. Doing the latter is easy if your headset has two 3.5mm jacks so you can plug in the microphone jack but not the listen/audio output jack. My suggestion, is to see if you can use a different pair of headphones for your audio output and either get a budget external microphone or use your existing headset as a microphone only. I should note that the mic is muted on the headset through this entire video, so this output bleed has to be coming from inside the headset (or Discord, but I am not in a position to judge). Notice how Discord is no longer picking up erroneous input. Around halfway through, I unplug my headset's output (leaving the mic plugged in) and switch it for a different pair of headphones. Note how the input sensitivity is up near the middle of the bar. In it, I play some audio in the background through my aforementioned Turtle Beach headset. With that said, I encourage you to watch this brief gif: I have a similar issue with my Turtle Beach Earforce X12 headset and after doing some research, I can say one thing. I'm not trying to record audio, i mainly use my microphone for stream and VoIP (Discord really detect any sound from the output and redirects it into my microphone, i can't listen to something loud without letting the other users listen to the same thing and if i lower the sensitivity they cannot hear me). I know that probably there's something wrong with the motherboard' sockets but i noticed that TeamSpeak3 is the only software i know of that isolates audio output and input when selecting the "Windows Audio Session" option, so maybe there's a solution with a software that enables WASAPI for any application. I also tried (with both headsets) to connect the microphone and the headphone to different sides (microphone front and headphone rear, and vice versa), but still it leaks audio into the microphone, sometimes even when the microphone is disabled hardware-wise (with the button). Stereo Mix is disabled and the audio is not loud enough to be recorded by the microphone externally, probably it's crosstalk from the wires but I tried with a brand new headset (by the way they're both with 3.5mm jacks) and the problem persists. I noticed that my audio output (anything from system sounds to music) is leaking into my microphone.
0 Comments
Leave a Reply. |